020 3375 6674 Upload artwork Get a quote 24/7 Printing

How much of an A-board poster does the frame hide?

020 3375 6674 info@silverimagelondon.com Open 24 hours, 7 days a week — call or email and we will tell you what is possible today.

On the snap-frame A-boards that Silver Image Print & Signs supplies, the closed rails cover the outer 10 mm of the poster on all four sides, so an A1 poster of 594 × 841 mm shows 574 × 821 mm. Text and numbers stay 15 mm inside the edge, which leaves 564 × 811 mm for the message on an A1. The poster itself is still printed at the full A size, because the hidden strip is what the rails grip. The table below gives the visible area, the safe area and the file size for A2, A1 and A0.

Written by Maciej Antosz, Production Manager at Silver Image London ·

In A-board printing the frame is bought once and the poster is changed many times, so the artwork is the part that gets redone. An A-frame sign that loses the last digit of a phone number under its rail has a layout problem, not a print problem, and the layout is fixed by knowing three rectangles: the sheet, the part that shows, and the part where text is safe.

What size is the visible area of an A-board poster?

On our snap frames the visible area is the poster size less 20 mm in each direction, because the closed snap rail covers the outer 10 mm on every side. Other frames vary, and the section on your own frame below covers them. The safe area for text and numbers is the poster size less 30 mm in each direction, 15 mm in from each edge. Backgrounds and pictures run to the edge of the sheet and under the rail; only words, numbers and logos have to stay inside the safe area.

Snap-frame A-board posters: sheet size, visible area behind a 10 mm rail and safe area for text 15 mm inside the edge.
PosterSheetVisible areaSafe area for text
A2420 × 594 mm400 × 574 mm390 × 564 mm
A1594 × 841 mm574 × 821 mm564 × 811 mm
A0841 × 1189 mm821 × 1169 mm811 × 1159 mm

The rail takes a larger share of a small poster than of a large one: about 8% of the area of an A2 sheet is under the rail, about 6% of an A1 and about 4% of an A0. On the smallest frame the margin is the first thing to plan.

What size should the artwork file be?

The file is set to the trimmed A size with 3 mm of bleed added on every edge: an A1 poster trims to 594 × 841 mm and is 600 × 847 mm including bleed. On our A-board specification a PDF at 150 dpi at the final size is preferred, which for an A1 is about 3,508 × 4,967 pixels of image. The poster is cut to the printed edge, and the bleed is what keeps that edge clean.

Artwork file for an A-board poster: size with 3 mm bleed on every edge, and image pixels at 150 dpi at the trimmed size, excluding bleed. The pixel figures are for images; text and logos are best kept as vectors.
PosterFile with bleedPixels at 150 dpi
A2426 × 600 mm2,480 × 3,508
A1600 × 847 mm3,508 × 4,967
A0847 × 1195 mm4,967 × 7,022

Whether a photograph holds up at these sizes can be checked with the print preflight tool, and the same sums for paper posters are in what DPI for an A0 poster. Our snap-frame A-board is double-sided, so artwork is sent for both faces, or one design with a note that it repeats.

What if the poster is for a frame you already own?

For a frame you already own, the measurement that matters is the visible opening of that frame, because frames vary. Measure the sheet the frame takes and the opening that shows when the rails are closed. Where the overlap is equal on opposite edges, the sheet width less the visible width, divided by two, is the strip hidden on each side, and the same sum gives the height; otherwise each edge is measured separately, and the text margin follows the real overlap, not the 15 mm of our own frames. Silver Image Print & Signs prints poster inserts in A2, A1 and A0 and in custom sizes cut to the frame, on waterproof synthetic polypropylene and not on paper.

Where the frame is not a snap frame, the same three rectangles still apply: the sheet, the part that shows and the part where text is safe. Frames, sizes and the water-base swing sign for exposed pitches are on the A-board printing page, and plain posters for indoor frames under poster printing.

How much can an A-board poster say?

Our A-board specification asks for big type, few words and high contrast, because the reader is walking. A pavement sign that has to be studied has already been passed. The safe area sets the limit: on an A1 poster a line of text can be up to 564 mm long, and anything that must be read whole, such as a phone number or a web address, is kept inside that width and clear of the bottom rail. A2 suits arcades, doorways and tight pavements, A1 is the usual size on a London pavement, and A0 is for wide pavements and forecourts.

Artwork requirements for an A-board poster, from our pavement sign specification.
RequirementWhat we needWhy
SizeThe full sheet size the frame takes; for your own frame, the visible opening as wellFrames vary
Rail overlapText and numbers 15 mm inside the edgeThe closed snap rail covers the outer 10 mm on all four sides
Bleed3 mm on every edgeThe poster is cut to the printed edge
FilePDF preferred, at 150 dpi at the final sizeEvery file is checked here before production
Two facesBoth faces, or a note that one repeatsThe frame is double-sided

Checklist before you send an A-board poster

  • The frame — A2, A1 or A0, or the sheet size and visible opening of your own frame.
  • The file size — the A size plus 3 mm bleed on every edge.
  • Text and numbers — 15 mm inside the edge on all four sides.
  • Backgrounds — run to the edge, under the rail.
  • One face or two — and whether the second repeats the first.
  • The number of posters, and the day they go into the frame.

Q&A

What size poster goes in an A1 A-board?

An A1 A-board takes an A1 poster of 594 × 841 mm. On the snap frames we supply, the closed rails cover 10 mm on each side, so 574 × 821 mm of it shows.

How far from the edge should text be on an A-board poster?

On the Silver Image Print & Signs specification, text and numbers stay 15 mm inside the edge of the poster on all four sides. The rail covers the outer 10 mm, and the remaining 5 mm keeps the text off the rail.

Should the poster be made smaller to fit the visible area?

No. The poster is printed at the full A size, because the rails grip the outer strip. Only the text, numbers and logos are kept inside the safe area; the background runs to the edge.

Are A-board poster inserts waterproof?

Silver Image Print & Signs prints A-board inserts on waterproof synthetic polypropylene with UV-cured ink, not on paper, and every kit includes a clear anti-glare cover sheet.

Size and quantity move the figure. Frames and inserts are quoted on their specification on the A-board printing page, printed in London at our London sign shop, and what drives print prices generally is in how much printing costs in London. Signs for a shop front as a whole are under shop signs, and what a new shop needs printed is set out for retail brands and pop-up shops.

View all printing services →

Tell us the frame and the message

Send the poster size or the measurements of your own frame, the artwork and the number of posters. Every file is checked before production, and we come back with a firm figure.

SAP Business Network member registered member

Silver Image Print & Signs: a 24-hour print shop in London for same day printing, large format printing, roller banners, Foamex boards, exhibition graphics and document printing.