How many panels does a site hoarding need?
020 3375 6674 info@silverimagelondon.com Open 24 hours, 7 days a week — call or email and we will tell you what is possible today.
A printed site hoarding needs one panel for every 1.22 m of fence: divide the length of the run in metres by 1.22 and round up. Silver Image Print & Signs prints hoarding graphics as numbered 2440 × 1220 mm panels mounted upright side by side, so a 10 m run is 9 panels and a 20 m run is 17. The tables below estimate the panels, the joints, the net area of the elevation and the size of the artwork file for runs from 5 to 100 m; the final quote depends on the confirmed panel split and the specification.
Written by Maciej Antosz, Production Manager at Silver Image London ·
A construction hoarding is designed as one continuous picture and built as a row of sheets. The timber wall belongs to the hoarding contractor; the hoarding panels that skin it are printed, cut and numbered to a panel split worked out from the elevation drawing. Knowing the panel count before the design starts tells the designer where the joints will fall and how large the file has to be.
How many hoarding panels does each length of fence need?
Each hoarding panel is 1220 mm wide and 2440 mm tall, so the panel count is the run length divided by 1.22 m, rounded up to the next whole panel. Where the length is not an exact multiple of 1.22 m, the last panel in the run is narrower than the rest. The number of joints is one fewer than the number of panels, and the net area of the elevation is the run length multiplied by 2.44 m. The estimates assume one straight, level, uninterrupted elevation 2.44 m high, with full-width panels starting at one end and only the last panel trimmed; gates, openings and returns are left out.
| Run length | Panels | Joints | Net elevation area |
|---|---|---|---|
| 5 m | 5 | 4 | 12.2 m² |
| 10 m | 9 | 8 | 24.4 m² |
| 15 m | 13 | 12 | 36.6 m² |
| 20 m | 17 | 16 | 48.8 m² |
| 30 m | 25 | 24 | 73.2 m² |
| 50 m | 41 | 40 | 122 m² |
| 100 m | 82 | 81 | 244 m² |
The figures are for one straight elevation. A site hoarding with a return, a gate or a corner is counted one elevation at a time, because each elevation has its own drawing and its own panel split. The count that goes into production is the one on the split we send back with the quote.
Where do the joints between hoarding panels fall?
On a hoarding built from full panels there is a joint every 1220 mm along the run, measured from the end the split starts from. Faces, logos and headlines are kept clear of those lines. Silver Image Print & Signs marks every joint on the proof, and moving a logo at that stage costs nothing; moving it after the panels are printed means reprinting them. The artwork carries 5 mm of bleed on each panel edge so the image closes up across the joints.
The panels arrive numbered in sequence, so the installers work down the run panel by panel. Screw pilot holes are drilled on request, so that fixings land on the structure and not through a face in the artwork.
How much of the 2440 mm height can carry the message?
Critical content stays 150 mm off the top and the bottom of the wall, which leaves a band 2140 mm tall on a 2440 mm panel. A header rail runs along the top of a hoarding elevation and a dark kicker board along the pavement line, and on site they cover the extremes of the panels. On a sloping street the panels step with the ground, so the artwork needs 50 mm or more of spare image at the top and the bottom. The same estimate of the count holds while the horizontal length of the run is unchanged; the final count comes from the stepped elevation drawing.
How big is the artwork file for a hoarding?
Hoarding artwork is supplied as one continuous file for each elevation, built at 1:10 with 300 dpi imagery, which works out at about 1,181 pixels for every metre of fence. A 20 m run is a file 2,000 mm long and 244 mm tall, or about 23,622 × 2,882 pixels. The file is not cut into panels before it is sent: the split is done by us, so that the joints are placed and checked by the people who print them.
| Run length | File at 1:10 | Pixels at 300 dpi |
|---|---|---|
| 5 m | 500 × 244 mm | 5,906 × 2,882 |
| 10 m | 1,000 × 244 mm | 11,811 × 2,882 |
| 20 m | 2,000 × 244 mm | 23,622 × 2,882 |
| 30 m | 3,000 × 244 mm | 35,433 × 2,882 |
| 50 m | 5,000 × 244 mm | 59,055 × 2,882 |
Scaling rules for work this size are in how to prepare artwork for large format, and file types in what file format to send for printing.
Which board are the hoarding panels printed on?
The board follows the length of the build: 3 mm Dibond for 5 to 10 years outdoors, 5 mm Foamex for 1 to 2 years, and 4 to 5 mm Correx for 6 to 12 months. The panel count is the same on all three, because the sheet size is the same. The material pages are Dibond printing, foam board printing and Correx printing, and the choice between two of them outdoors is worked through in Foamex vs Dibond.
Silver Image Print & Signs keeps the panel split files after the run is delivered, so a single damaged panel is reprinted by its number without reprinting the run. The mandatory safety signs that go with a site are printed separately and fixed beside the graphics.
| Requirement | What we need | Why |
|---|---|---|
| Elevation drawing | Real site dimensions for each elevation | The panel split and the count are worked out from it |
| Artwork | One continuous file per elevation, at 1:10 with 300 dpi imagery | The split into panels is done here |
| Joints | Faces, logos and headlines clear of the panel joints | There is a joint every 1220 mm |
| Bleed | 5 mm per panel edge; 50 mm or more top and bottom on a slope | Stepped panels use up vertical image |
| Top and bottom | Critical content 150 mm off both | The header rail and the kicker board cover them on site |
Checklist before you ask for a hoarding quote
- The length of each elevation — in metres, from the site drawing.
- The panel count — length divided by 1.22, rounded up, for each elevation.
- Sloping ground — flagged, so the extra bleed is built in from the start.
- The board — Dibond, Foamex or Correx, by how long the fence will stand.
- The laminate — matt or anti-graffiti, and whether panels need pre-drilling.
- The install date — production is booked to land before it.
Q&A
What size is a hoarding panel?
A hoarding panel from Silver Image Print & Signs is a 2440 × 1220 mm sheet, mounted upright, so each panel covers 1.22 m of fence and stands 2.44 m tall.
How many panels does a 10 m hoarding need?
A 10 m hoarding run needs 9 panels of 1220 mm: eight full panels cover 9.76 m, and the ninth is cut to the remaining 0.24 m. The net area of the elevation is 24.4 m².
Should the artwork be cut into panels before it is sent?
No. Hoarding artwork is sent as one continuous file for each elevation. Silver Image Print & Signs does the panel split and marks every joint on the proof.
Does a sloping street change the number of panels?
Not while the horizontal length of the run stays the same: the panels step down with the ground. What changes is the artwork, which needs 50 mm or more of spare image at the top and the bottom, and the final count is confirmed from the stepped elevation drawing.
Length, board and laminate all move the figure. Every hoarding run is quoted from the elevation drawing on the construction hoarding page, produced in London at our London sign shop; hoarding as one layer of a development site is covered for property developers, and what drives print prices generally is in how much printing costs in London.
Send us the elevation
Send the elevation drawing with the real site dimensions, the board, the laminate and the install date. We come back with the panel split, a firm price and a firm date.
SAP Business Network member registered member