How many guests fit on an A1 table plan?
020 3375 6674 info@silverimagelondon.com Open 24 hours, 7 days a week — call or email and we will tell you what is possible today.
An A1 table plan is the usual size for 100 to 150 guests, and A0 for anything larger. On our own layout sums for one example layout, 150 guests on an A1 board leave room for names at about 30 pt, with capital letters about 7.3 mm high; the same 150 guests on an A2 board come down to about 21 pt. Silver Image Print & Signs prints table plans at A2, A1 and A0 on rigid Foamex board with a matt finish. What changes with the number of guests is not whether the names fit but how large they can be, and the table below gives that size for 50 to 300 guests on each board.
Written by Maciej Antosz, Production Manager at Silver Image London ·
A table plan is read standing up, by guests who arrive together and look for one name each. Table plan printing is the easy part; the decision that makes a seating plan work is the board size against the guest list, because adding tables can reduce the size the names can be, depending on how the columns fall.
How large are the names for each number of guests?
The more guests on a board, the smaller the names: on an A1 board, in the layout modelled here, they fall from about 43 pt at 50 guests to about 20 pt at 300. The figures below are our own sums for one stated layout, not a rule of design and not a test of readability. The model is a portrait board with guests grouped ten to a table; each table is a block of 12 lines, a heading, ten names and a space, kept whole in one column; a title band takes the top 15% of the board; the side and bottom margins of the layout are 5% of the board width; columns are 10 mm apart; line spacing is 1.35; and each column is wide enough for the 22-character example name Christopher Montgomery in Georgia. The number of columns is the one that gives the largest size, and sizes are rounded down to the whole point. They are geometry, worked out on 17 November 2026, and have not been set as artwork or tested in print; a different layout, typeface, widest name or number of guests per table gives different sizes.
| Guests | A2 board | A1 board | A0 board |
|---|---|---|---|
| 50 | 30 pt, 7.3 mm | 43 pt, 10.5 mm | 61 pt, 14.9 mm |
| 100 | 21 pt, 5.1 mm | 31 pt, 7.6 mm | 45 pt, 11.0 mm |
| 150 | 21 pt, 5.1 mm | 30 pt, 7.3 mm | 43 pt, 10.5 mm |
| 200 | 17 pt, 4.2 mm | 24 pt, 5.9 mm | 36 pt, 8.8 mm |
| 250 | 17 pt, 4.2 mm | 24 pt, 5.9 mm | 34 pt, 8.3 mm |
| 300 | 14 pt, 3.4 mm | 20 pt, 4.9 mm | 29 pt, 7.1 mm |
A2 is 420 × 594 mm, A1 is 594 × 841 mm and A0 is 841 × 1189 mm. Each step up gives names roughly 40 to 50% larger for the same guest list, because each A size is about 1.41 times the one below in both directions and the number of columns can change.
Which board size for which guest list?
On our table plan specification, A1 is the usual size for 100 to 150 guests and A0 is for anything larger. The sums show what that means in type size under this one layout: at 150 guests an A1 board carries the example names at about 30 pt, and at 250 guests an A0 board carries them at about 34 pt. A2 suits a small dinner; at 50 guests it gives about 30 pt. The sums do not set a threshold for readability, which also depends on the typeface, the lighting and how close guests stand. Where the wall suits it better than an easel, the plan can be split across separate cards, one for each table, in place of one board.
Two boards are the other answer for a long list. In the same model, 300 guests on a single A0 give about 29 pt; split across two A0 boards of 150 guests each, the same names come out at about 43 pt, and two groups of guests can read at once.
How should the names be sent?
The seating list is sent as a spreadsheet, one row for each table, and not as artwork. Late changes to the guest list are then a re-run of the plan and not a redraw. How to lay out a list of names is covered in setting up a spreadsheet of names, and the same list can drive the place cards for the tables. Sizes for the invitations that go out before the event are in what size is an invitation.
Text and logos stay 5 mm inside the trim, and the background prints to the finished edge. Fonts are converted to outlines, which removes the risk of a font being substituted when the file is opened.
What is a table plan printed on?
Silver Image Print & Signs prints table plans on rigid Foamex board, so the plan stands on an easel without a frame. The finish is matt as standard, so the plan stays readable under venue spotlights; gloss is available on request. A rigid board cannot be rolled, so it travels flat. Boards in general are on the foam board printing page, and welcome boards, which are usually ordered with the seating plan, follow the same sizes in A0 and A1 board printing.
| Requirement | What we need | Why |
|---|---|---|
| Board size | A2, A1 or A0, or a custom size | A1 is usual for 100 to 150 guests, A0 for more |
| Guest names | The seating list as a spreadsheet, one row per table | Late changes are a re-run, not a redraw |
| Safe margin | Text and logos 5 mm inside the trim | The background prints to the finished edge |
| Finish | Matt as standard, gloss on request | Matt stays readable under venue spotlights |
Checklist before you choose a table plan size
- The number of guests — and the number of tables.
- The board — A2, A1 or A0, one board or two.
- The layout — by table or as one alphabetical list.
- The widest name — in the chosen typeface; it sets the column width.
- Easel or wall — one board, or separate cards for each table.
- The date of the event, and when the list is final.
Q&A
What size table plan for 150 guests?
A1 is the usual size for 100 to 150 guests on the Silver Image Print & Signs specification. On our layout sums for one example layout, 150 guests on an A1 board leave room for names at about 30 pt, with capitals about 7.3 mm high.
Is A2 big enough for a table plan?
A2 suits a smaller guest list. On our layout sums an A2 board carries 50 guests at about 30 pt and 100 to 150 guests at about 21 pt, against about 30 pt for 150 guests on A1.
When is an A0 table plan needed?
A0 is the size for guest lists larger than about 150. On our layout sums an A0 board carries 200 guests at about 36 pt and 300 guests at about 29 pt.
Does a table plan come with an easel?
The table plan is printed on rigid board that stands on an easel. Say with the order whether an easel is needed as well.
Board size and quantity move the figure. Table plans are quoted on their specification on the table plan printing page, printed in London at our London print shop, and what drives print prices generally is in how much printing costs in London. What else a dinner needs printed is set out for corporate dinners and awards.
Send the guest list and the board size
Send the seating list, the number of tables and the board size you have in mind. We come back with a firm figure and tell you if the names would come out small on that board.
SAP Business Network member registered member