020 3375 6674 Upload artwork Get a quote 24/7 Printing

Matt or gloss laminate: which finish for which print?

020 3375 6674 info@silverimagelondon.com Open 24 hours, 7 days a week — call or email and we will tell you what is possible today.

Matt laminate diffuses light, so text stays readable under a shop light, a spotlight or low sun; gloss laminate reflects it, which lifts colour and gives a photograph depth. At Silver Image Print & Signs, matt is the usual choice for text, signs and anything read at an angle, gloss for photographic work, and soft-touch for prestige book covers. Some products carry a specialist laminate instead: anti-graffiti on outdoor boards and hoardings, and a textured anti-slip laminate on floor graphics. The table below sets out the finishes each product is offered in.

Written by Maciej Antosz, Production Manager at Silver Image London ·

Lamination is a clear film sealed over the print. It protects the surface from handling, scuffs and moisture, and it changes how the print looks. The question that comes with almost every card, cover and sign is whether that film should be matt or gloss, and the answer depends less on taste than on where the piece will be read and what it carries.

What is the difference between matt and gloss laminate?

Matt laminate diffuses light instead of reflecting it; gloss laminate reflects it. On our sticker specification the difference is put plainly: gloss lifts colour and looks more saturated, which suits photographic artwork and product labels, while matt stays readable under a shop light or a camera flash and does not show fingerprints. Where text has to be read at an angle, matt wins. On invitations, gloss lamination gives depth of colour to a photograph, and an unlaminated uncoated card keeps the texture of the board.

Laminate finishes by product, from the Silver Image Print & Signs service pages, November 2026.
ProductFinishes offeredWhat decides it
Business cardsUnlaminated, or laminated; 450 gsm litho cards in gloss or silk laminateUncoated takes a pen; the laminate is confirmed at quotation
InvitationsUnlaminated, matt or glossGloss for a photograph; uncoated for the texture of the board
Place cardsUnlaminated, matt or glossLaminated where cards are handled repeatedly through a long event
Strut cardsMatt or glossDurability where cards are touched often, at reception desks and counters
StickersMatt or gloss, over the printGloss for colour; matt for text read at an angle or under a light
BookletsCreased, matt-laminated 300 gsm coverPart of the most ordered booklet specification: A5 with 130 gsm silk text pages
Perfect bound booksSoft-touch, matt or gloss coverSoft-touch for prestige, matt for anti-glare handling, gloss for photographic work
Table plansMatt as standard, gloss on requestMatt stays readable under venue spotlights
Dibond signsMatt, gloss or anti-graffiti over-laminateMatt for glare, gloss for depth, anti-graffiti where paint must wipe off
Hoarding panelsMatt or anti-graffiti, as standard practiceMatt for headlight and low-sun glare; anti-graffiti where the wall will be tested
Wayfinding signsMatt protective over-laminateReduces glare; never gloss over a tactile plate
Floor graphicsTextured anti-slip laminate, rated R10 or R11The rating is the film manufacturer's, with their datasheet

For a product not listed here, its own page gives the finishes it is offered in; ask which finishes are available with the quote.

When is matt the better choice?

Matt is the better choice wherever the piece is read under light that would bounce off a gloss surface. A table plan stands under venue spotlights, which is why Silver Image Print & Signs prints it matt as standard. A hoarding faces headlights and low winter sun, a Dibond sign a sunlit wall, a wayfinding panel the overhead lights of a corridor. On a perfect bound book, matt is the cover for documents that are handled, and on a sticker it is the finish for text read at an angle or under a shop light. On our sticker specification, matt also does not show fingerprints.

When is gloss the better choice?

Gloss is the better choice where the piece is mainly a picture. It lifts colour and gives a photograph depth, which is why it is the finish named for photographic work on our perfect binding covers, for product labels and photographic stickers, and for invitations built around a photograph. On a Dibond sign, gloss is the over-laminate for depth of colour. The trade-off is reflection: a gloss surface under a strong light shows the light, and on a tactile plate the reflection destroys the contrast the plate exists to provide.

What about soft-touch, anti-graffiti and anti-slip?

Some products use a specialist laminate chosen for a particular job. Soft-touch is the velvety cover finish named on our perfect binding specification for prestige documents. On our hoarding specification, anti-graffiti is a clear, chemically inert film over the print: spray paint and marker sit on the film instead of bonding to the ink, so the site team wipes a tag off with a solvent cleaner and the print underneath survives; it is offered on Dibond signs as well. Anti-slip is the textured laminate on floor graphics, rated R10 or R11 by the film manufacturer, whose datasheet is passed on with the order.

Does lamination change the artwork or the timing?

Lamination takes no printable area: the sheet is trimmed after laminating, so the standard 5 mm safe margin is all a laminated menu needs. Encapsulation is a different finish, often confused with it: the print is sealed in a pouch with a welded border of roughly 4 to 8 mm on every side, so text and logos stay 8 mm inside the trim; both are covered on the menu printing page. On our perfect binding specification, lamination is not decoration on a cover: an unlaminated dark cover can crack white along the spine folds when it is opened. On business cards, lamination is a finishing step with its own place in the schedule, and on a laminated card whether a pen writes on the surface depends on the film and the pen. The card weights that go with each finish are in which card stock for business cards, and invitation finishes in what size is an invitation.

Checklist before you choose a laminate

  • Where it will be read — under spotlights, shop lights or sun: matt.
  • What it carries — mostly a photograph: gloss; mostly text: matt.
  • Whether it gets written on — an uncoated, unlaminated card takes a pen.
  • Outdoors or on a floor — anti-graffiti is an option on Dibond and hoarding; anti-slip is the finish on floor graphics.
  • Laminated or encapsulated — for menus, the two need different margins.
  • Name the finish in the order — matt, gloss, soft-touch or none, not just “laminated”.

Q&A

Is matt or gloss laminate better for business cards?

For a card that gets written on, an uncoated unlaminated card takes a pen. Where a laminate is wanted, Silver Image Print & Signs confirms the laminate at quotation; on 450 gsm litho cards it is gloss or silk.

Does matt laminate show fingerprints?

Matt laminate diffuses light and does not show fingerprints the way gloss does, which is why it is the finish for text read under a light or handled often.

Which laminate is used on outdoor signs?

On our Dibond specification the over-laminate is matt to cut glare, gloss for depth of colour, or anti-graffiti where spray paint has to come off without taking the print with it. On our hoarding specification, matt or anti-graffiti is applied as standard practice.

Can a laminated tactile sign be gloss?

No. On our wayfinding specification a gloss laminate is never put over a tactile plate, because the reflection destroys the contrast the plate exists to provide; the over-laminate our wayfinding specification offers to reduce glare is matt.

Product, finish and quantity all move the figure. Each laminated product is quoted on its specification on its own page, printed in London at our London print shop, and what drives print prices generally is in how much printing costs in London.

View all printing services →

Send the job and say where it will be read

Send the artwork with the product, the quantity and where the piece will be used. We come back with the finish that suits it and a firm figure.

SAP Business Network member registered member

Silver Image Print & Signs: a 24-hour print shop in London for same day printing, large format printing, roller banners, Foamex boards, exhibition graphics and document printing.